The reading lights are electronic devices like the others. Sometimes problems arise and it is necessary to do some manipulations to use the reading light again. This is the case of the battery problem discharged on a Kindle.
If you’re reading this article, you may have a problem with your Kindle’s battery.
The problem can be manifested in different ways:
- Your eReader may not start due to lack of battery (it is like blocked)
- Your e-reader is not charging
- Your e-reader does not hold the charge
These problems have different solutions and we will see how to solve them in this post.
- Fully charge your Kindle Reader
The first thing to know with the Kindle Fire Repair is that it should not be left for months without charge.
This happened to me on an old model, the e-reader ended up going out completely, and you have to recharge it a long time to get it back.She was somehow stuck.
Therefore, the first thing to do is connect the light to a power source and let it plug overnight (about 10 hours).
To do that, I prefer to use an AC adapter so I do not have to leave my computer on for too long, but you see it.
If you are looking for a good USB power adapter the Aukey model is great for fast charging Kindle readers (and other devices like smartphone and tablet):
Once your Kindle Reader is plugged in, make sure that the charging light comes on when the eBook Reader is charging.
If this first operation does not work, try again with a different cable.
Tip: If you use the same cable to charge your smartphone and eReader, try to find the official Kindle cable for charging.I noticed that there are sometimes false contacts (rare it is true) using another cable.
This is the case for the latest Kindle Paperwhite Repair, which is waterproof.Maybe the USB port is a bit special so.
- Restart your Kindle Reader
Despite a full charge that seems to have worked, your Kindle reader is still stuck with a dead battery?
You must then attempt a complete reboot of your e-reader by doing the following:
- Leave the power button pressed for at least 7 seconds
- Hopefully, the screen changes and we offer you the option to restart
- Release the button and choose “Restart”
If you do not see the restart options, it’s because your Kindle is completely blocked.
Do not panic; in this case, keep the power button pressed for 40 seconds.
After 8 to 10 seconds, the screen will turn white if all goes well.It is important to continue holding the button for another 40 seconds until the small light comes on.Now your reader should start normally.
- Your reader is discharging too fast
If, on the other hand, you find that your eReader is discharging too fast, you can attempt a complete reset of your eReader to restore its original settings.
- How to save battery on your eReader?
In order not to run out of battery too regularly, here are some tips to save your e-reader’s battery:
Turn off the Wi-Fi if you do not need it: regularly your Kindle Repair Near me will connect to the Internet and if you leave the Wi-Fi turned on, it can strongly penalize the autonomy of the reading light.
Turn down the light or turn it off: If you have a Kindle Paperwhite, Kindle Travel or Kindle Oasis, your reading light is equipped with a lighting system that will use battery power. To increase the Kindle’s battery life, you can simply turn off the light or reduce its light intensity.
Turn off your e-reader at the end of the reading: sometimes you have a tendency to put on the e-reader as soon as you finish reading. However, simply pressing the power button will put the Kindle on hold and save a few hours of battery life a month.
Finally, it is not very good for a battery to stay long without recharging. If you store your e-reader for several months in a closet, try recharging it at least once every quarter to preserve the battery.